Velostrata v3.0 Release Notes
Google Cloud Platform Support (Beta)
Velostrata V3.0 introduces Google Cloud Platform support (beta). In addition to Velostrata’s support of AWS and Azure, you can now migrate VMs in streaming mode to GCP as well. GCP support is at beta level in terms of functionality and scale. The following features are not available in beta: offline migration, reconfigure Cloud Extension (CE), reconfigure VM, rightsizing recommendations. Contact Velostrata support for more details.
Non-disruptive Upgrade from 2.7 to 3.0
Upgrade to V3.0 from V2.7 in a non-disruptive manner. The upgrade process includes both Backend (BE) and Cloud Extension instances.
Reconfigure Cloud Extension
V3.0 allows users to update the Cloud Extension configuration parameters such as the edge security group, default workload security group and cloud credentials.
Bandwidth Throttling and Bandwidth Utilization
WAN traffic from BE to Cloud Extension instances can now be throttled to avoid congestion of WAN link to the cloud vendor during migration (this does not apply to on-demand traffic).
Rightsizing is a workload analysis and recommendation tool to help reduce cloud instances consumption costs and/or optimize for cloud instances performance.
The feature includes built-in usage monitoring and a recommendation engine that provides cost- and performance-optimized cloud instance type and size recommendations and can be enabled/disabled per VM.
Azure Storage Account Key Rotation Support
Velostrata V3.0 introduces support for Azure storage account keys rotation.
Ubuntu 16 Support
Streaming migration support for Ubuntu 16.04.x
Compatibility and Installation
ESXi, vCenter Server, and vSphere Web Client Compatibility
This Velostrata release is compatible with the following VMware versions:
- vCenter: 5.5U1, 6.0U1, 6.5, 6.5U1.
Note: vCenter is a required component in a deployment.
- ESXi: 5.5U1, 6.0 U1.
Note: 5.0 and 5.1 may be used in certain configurations; contact support for details.
Web Browser Compatibility
The latest versions of the following Web browsers are known to be compatible with the Velostrata vCenter Web Client plugin: Chrome, Internet Explorer, Firefox, Safari.
The vCenter Web Client leverages the Adobe Flash extension in your browser. Velostrata recommends that the Flash plug-in for your browser be updated to the latest version. Use Flash player version 220.127.116.11 or later.
To check your current Flash player version, go to: http://www.adobe.com/software/flash/about/.
Virtual Machine Compatibility
Only Virtual Machines configured with BIOS virtual firmware are supported. UEFI virtual firmware is not supported. A conversion procedure may be available; contact Velostrata Support.
Velostrata makes use of Virtual Machine snapshots. Virtual Machine disks in Dependent mode (default) and Virtual RDM mode are supported with full functionality.
Virtual Machine disks in Independent mode (persistent and non-persistent) and Physical RDM mode are supported with limited functionality; contact Velostrata Support for details if used.
IDE virtual disks are currently not supported. Change the virtual disk type to SCSI to enable move to cloud.
Physical Server Support
Migrating a physical server to cloud is done by booting a Velostrata Connector ISO image into the server’s RAM from a virtual or physical DVDROM/CDROM device. The Velostrata connector maps the local storage and creates a Stub VMware VM as a management object for Velostrata cloud migration operations. From this point on, the migration is done in similar way to the migration of other VMs, only in Write Isolation mode.
Note: The Stub VM created in the process is intended for Velostrata management operations only, and not set up for local execution on vSphere. It is set up with no network interface, and a minimal CPU/RAM setting.
- Disk types supported include SAS, SATA, SSD, virtual disks presented by hardware controller, and SAN volumes mounted on physical HBAs. PATA/IDE disks are not supported.
- Minimum 4GB RAM.
- Physical DVDROM/CDROM or virtual CDROM to boot the Velostrata Connector ISO from.
Follow user guide instructions for the physical migration process. For further details, see Migrating Physical Servers.
Guest Operating System Compatibility
Supported Windows Versions:
- Windows Server 2008 R2 SP1 or higher.
- Windows Server 2012/Windows Server 2012 R2.
- Windows 2016 (Beta)
Supported Windows Versions with Offline Migration(see further details in Using Offline Migration):
- Windows Server 2003, Windows Server 2003R2, Windows Server 2008
Supported Linux Distributions and Versions:
- RHEL 6.x, RHEL 7.x
- CentOS 6.x, CentOS 7.x
- SUSE Linux Enterprise Server 11 SP2 or higher
- SUSE Linux Enterprise Server 12 SP2 or higher
- Ubuntu 14.04.x, 16.04.x
Supported Linux Versions in Offline Migration (see further details in Using Offline Migration):
- Ubuntu 12.x, Ubuntu 16.x
- RHEL 5.1 or higher 64-bit RHEL 5.11 and higher supported also with 32-bit
Note:Block device naming considerations differ across target cloud provider and depend on underlying virtualization platforms. Use of either LVM or GUID-based device names in configuration files is recommended. The Velostrata RPM automatically checks for direct device mapping in the typical configuration files (/etc/fstab, and GRUB) and replaces the physical source (e.g. /dev/sda/) with a GUID.
V3.0 REST API
- ReconfigureVm operationId was changed from reconfigure to reconfigureVm.
- In VmStateDescription, added ActualEdgeNade, PrefferedEdgeNode is instead of EdgeNode.
New items in API:
- GCP support
- ReconfigureCE Operation
- Recommendations feature added
- In HealthChecks, addedPendingUpgrade and SqsReachability
- In CheckedElementType added CloudExtension
- In HealthCheckImpact, added Medium
- New task types: ReconfigureCloudExtension and UpgradeCloudExtension
- SubscriptionType and about API (ProductInfo)
- Added Security groups for AWS and Azure cloud extension object
- In CloudExtensionState added Upgrading
- In CloudExtensionState, added credsId
- In AzureVmInfo, added azureHubLicense
- securityGroupIds moved from the base MoveToCloudRequest to AWS and Azure
- WL security group moved from base CCE request to AWS and Azure
- CredentialsDescription now have 3 sub types AWS/Azure/GCP, base remains the same.
Only MBR disks are supported for Guest OS boot disks. Both MBR and GPT disks are supported for data disks. If you have machines with GPT boot disks, contact Velostrata Support for possible conversion options.
#4266: Run-in-cloud and migration operations may fail for Windows Server 2016 workload when Symantec Endpoint Protection (SEP) is installed. This may also happen when SEP appears to be disabled.
Workaround: Modify workload Network interface bindings to remove SEP option.
Download Microsoft Network VSP Bind (nvspbind) - download link.
Install Microsoft_Nvspbind_package.EXE into c:\temp.
Open Command prompt as an Administrator and run the following: nvspbind.exe /d * symc_teefer2.
Known Instance Type Compatibility Issues
The following AWS instance types may experience host missing driver issues. Refer to the AWS driver lists for specific kernel and driver information.
- For C4 types, see: http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/c4-instances.html
- For G2 and P2 types, see: http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using_cluster_computing.html
- For X1 types, see: http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/x1-instances.html
Specific AWS instances known issues:
- c4.8xlarge - Verified to work with CentOS 6.8, 7.2, RHEL 7.2, SUSE 11 SP4 and Windows Server 2008 R2 SP1, Windows Server 2012 R2. Not supported with RHEL 6.x.
- g2.2xlarge - Verified to work with CentOS 6.8, 7.2, SUSE 11 SP4 and Windows Server 2008 R2 SP1, Windows Server 2012 R2. Not supported with RHEL 6.x, 7.2.
- x1.32xlarge - Verified to work with CentOS 6.8 and RHEL 7.2, SUSE Linux Enterprise for SAP Applications 11 SP4. Not supported with RHEL 6.x, CentOS 7.2, SUSE 11 and Windows Server.
#3779: Workloads running Windows OS may fail to boot in Azure using A-series VM sizes.
Workaround: Use Av2 or Av3 series VM sizes.
The minimum link bandwidth between on-premises and the Cloud Extension nodes is recommended to be the larger of:
- Link bandwidth of 20 Mbit/sec, symmetric
- Upload bandwidth to cloud calculated as total number of VMs migrating concurrently, multiplied by 0.5-1 Mbit/sec per VM.
This is required for appropriate access times when moving VMs to the cloud in streaming mode.
For example, Velostrata recommends a minimum of 50-100 Mbit/sec for production use of up to 100 VMs running in the cloud.
- VMware virtual disk consolidation warning - When write-back consistency checkpoints are persisted in the vSphere Datastore on-premises, a snapshot rotation and virtual disk consolidation is performed. During consolidation, the virtual machine will have an event showing that its disks require consolidation. This status is temporary and will automatically get resolved when consolidation triggered by Velostrata has completed. A similar behavior occurs when moving a virtual machine to run back on-premises.
- Typical storage throughput per virtual disk - Due to vSphere Storage API limitations, throughput achieved on-premises per VMDK is observed to be limited to about 20-30Mbytes/sec. When workloads are highly concentrated into a single virtual disk, the initial performance seen in the cloud may be limited due to an increase in storage access latency back on-premises. This situation typically resolves itself within minutes, as soon as an active working set is established in the Velostrata cache, in the cloud.
- Maximum concurrent read sessions per ESX host - Due to vSphere Storage API limitations, the number of storage access sessions per ESX host is constrained. Velostrata enforces a limit of up to 60 VMDKs or RDMs per ESX host, for virtual machines that run in the cloud (active). Multiple ESX hosts may be used. Given that these virtual machines are not actually executing on the ESX hosts, these hosts can be of minimal specs.
- Free space on source datastore - Write back activity for a VM running in the cloud is temporarily put on hold when the backing vSphere Datastore’s free capacity is lower than 10%, and a vCenter alarm is raised to indicate of the issue. Write back will resume automatically as space is freed up on the datastore
Workaround: Monitor the Uncommitted Writes counter and correlate it to low-disk space events from the vSphere datastore. When write back is put on-hold, the Uncommitted Writes graph indicates a growing count for longer periods.
#2596: In Azure, in some cases when canceling the detach operation in the middle of the operation - after the instance is terminated, the VM rolls back on-prem.
#3647: The "collect console log" action button in the Velostrata portlet on the VM Summary page does not work when running the vCenter Web Client on Google Chrome browser, in “Incognito” mode.
Workaround: Work in Chrome normal browsing mode.
#1257: When Velostrata Prep RPM is installed on a SUSE Linux Enterprise Server 11, the VM obtains a DHCP IP address in addition to an existing static IP configuration. This issue occurs when the VM is started on-premises in a subnet that is enabled with DHCP services.
Note: The issue does not occur when the subnet has no DHCP services. There is no connectivity impact for communications with the original static IP address.
#1027: In some cases, when a VM is moved to Run-in-Cloud while a 3rd party VM-level backup solution holds a temporary snapshot, the Velostrata periodic write-back operations will not complete even after the backup solution deletes the temporary snapshot. The uncommitted writes counter on the VM will show an increasing size and no consistency checkpoint will be created on-premises.
Workaround: Select the Run On-Premises action for the VM and wait for the task to complete, which will commit all pending writes. Then select the Run-in-Cloud action again. Note that committing many pending writes may take a while. Do not use the Force option as this will result in the loss of the uncommitted writes.
#1745: After registering the Velostrata plug-in, running the Cloud Extension wizard might generate an error “XXXXXXXXXX” upon “Finish”.
Workaround: Un-register the Velostrata plug-in and restart the vSphere Web client service, then re-register the plug-in. Contact support if the issue persists.
#1744: In rare cases, creating a Cloud Extension in Microsoft Azure fails due to the Azure service reporting it is busy.
Workaround: If the Cloud Extension appears in “impaired” state, retry using the “Repair Cloud Extension” operation. If no Cloud Extension entry is shown, retry the create operation
#1667: vCenter reboot causes Velostrata tasks in vCenter to disappear from UI. This is a vCenter limitation.
Workaround: Use the Velostrata PowerShell module to monitor Velostrata managed VMs or Cloud Extensions tasks that are currently running.
#1951: With an ESXi host in maintenance mode, if a VM is moved to cloud, the operation will fail and get stuck in the rollback phase.
Workaround: Manually cancel the Run-in-Cloud task, migrate the VM to another ESXi host in the cluster and retry the Run-in-Cloud operation.
#1917: A Run-in-Cloud operation fails with the error - "Failed to create virtual machine snapshot. The attempted operation cannot be performed in the current state (Powered off)".
Workaround: The VMware VM snapshot file may be pointing to a non-existent snapshot. Contact support for assistance in correcting the issue.
#1808: In rare cases, after running a Workload back on-premises - Workload VMDK's are locked. In certain cases, this is due to network disruptions between the Velostrata management appliance and the ESXi host on which the workload is running.
Note: The issue will resolve itself after 1-2 hours.
#2736: During Detach, the operation might fail with the following error message "Operation was canceled".
Workaround: Retry the Detach operation.
#3775: When performing a detach after a cancel detach operation, the action may fail.
Workaround: Retry the operation.
#3682: In the event of certain system failures, Velostrata components disconnect from vCenter. In this case, an event may not be sent, resulting in the alarm either not being set properly or not being cleared properly.
Workaround: Clear the alarm manually in vCenter.
#3320: For workloads with Windows machine using a retail license, when returning from the cloud, the license is not present.
Workaround: Reinstall the license.
#3281: vCenter “Export OVA” operation is available when the VM in cloud is running in cache mode, however, this operation results in a corrupted OVA.
Workaround: Only create OVA after the detach.
#3142: In rare cases, when a cloud component instance is created and system fails before it is tagged, the instance will remain untagged. This will not allow full clean-up or repair of the CE.
Workaround: Manually tag the instance, and then run "Repair".
#3988: AWS: When performing detach or reconfigure actions for a VM in dedicated instance tenancy type, and choosing an instance type that is not supported by AWS for dedicated instances, the instance will not be able to run in the cloud.
Workaround: Change the cloud instance type to one that is supported in dedicated instances mode.
#4604: Cloud Extension high availability does not work for workloads running Ubuntu OS with LVM configuration.
#3199: Suse12: Due to a bug in SUSE kernel older than 4.2, configurations that include BTRFS mounts with subvolumes are not supported.
Workaround: Upgrade to SUSE version with Kernel >=4.2 (SP2).
#4967: Run In Cloud will fail with an error when the VM name contains characters not supported by the target cloud provider
Workaround: Change the machine name in vSphere to contain supported characters only.
#4961: When moving a machine from GCP to on-prem or after the clean-up operation, the reserved address created by Velostrata for the machine will be released within an hour.
Workaround: if you need to release the address immediately, manually delete the reserved IP.
#4915: Following a successful force back operation on a VM an alert is not cleared.
Workaround: Manually clear the alert
#4834: After MGMT system reboot, previous alarms that were raised are not cleared in the GUI although the condition is back to normal.
Workaround: Clear the alarms manually.
#4619: Velostrata telemetry configuration for FE will not update after BE changes.
Workaround: Contact Velostrata technical support to update the FE telemetry configuration.
#4590: Prepare to detach is not grayed out for spot instances (but the operation fails).
Workaround: GUI issue, no functional impact.
#3905: When unregistering a VC and registering a new VC, the system continues to use the previous VC.
Workaround: Reboot the Velostrata virtual appliance, and the system will load the new VC configuration.
#3570: When using the Create Cloud Extension wizard, using illegal http proxy address will not generate a warning message.
Workaround: Delete the CE and then create the CE with a valid http proxy address.
#3142: In rare cases, creating a CE instance may fail, the system will restart the process to recreate the CE instance and will fail due to missing instance tags.
Workaround: Manually terminate the CE instance via the AWS console, and run Repair CE.
#3133: Run on-premise operation succeeded but the status is marked as failed with error “Failed to consolidate snapshots”
Workaround: Consolidate snapshots via vCenter, and clear the error manually.
#5161: Streaming Windows 2012R2 to AWS R4 dedicated instance fails to boot.
Workaround: Migrate the VM to R3 instance, once instance is detached you can switch the instance to R4.
#5242: Migrated Linux machines to AWS dedicated instance will not boot.
Workaround: Contact Velostrata technical support to apply system wide workaround.